Dollhouse – Modern Farmhouse Edition Digital 3MF + STL Files

About Dollhouse – Modern Farmhouse Edition

This modular dollhouse is designed for efficient 3D printing and straightforward assembly. All floors—including the first floor, second floor, and attic—are fully removable, allowing for easy access and customization.

Durable construction is achieved through integrated joints that enhance overall stability. Its modern, visually appealing design makes it a stylish addition to any playroom, office, or display space.

Files currently are at 1:20 scale (largest size the print bed will allow). If you would like to scale it down to 1:24 scale, simply scale each print down by 0.833. If you would like to scale it to 1:12, simply double the scale (will require larger print bed)

Included in this package:
• 3MF and STL files for all printable parts, split into sections (i.e. 1st, 2nd, attic, garage).
• Assembly instructions are available on my TikTok page City3DPrint.

NOTE: Furniture is not included.

Required hardware
• 3D Printer (minimum bed size: 256 X 256 X 256 mm)
• Super glue (Ideally, “Zap-A-Gap” Medium CA+)
• Exacto Knife

Recommended hardware
• Textured PEI Plate (Bambu Lab sells a gold one)
• Isopropyl alcohol wipes for cleaning print plate in-between prints

Recommended Filament Colors
• Inland Brand – PLA+ “White” (base, walls, and roof)
• Inland Brand – PLA+ “Black” (windows and doors)
• Inland Brand – PLA+ “Grey” (metal roof and shingles)
• Inland Brand – MATTE PLA+ “Wood Rainbow” or “Light Brown” (interior flooring)
• Inland Brand – COSPLAY PLA “Grey” (exterior flooring)
• Inland Brand – PLA+ “Bone White” (stone chimney)
• Inland Brand – PLA “Marble” (kitchen counter tops)
• Inland Brand – PLA “Silver” (lattice and stovetop)

Printing notes
• FDM printer with at least a 256 × 256 mm build area recommended
• PLA works well for all parts
• Layer height should be set at 0.16mm for all prints
• Use Gyroid infill for metal roofs to help smooth out pitch surface
• Turn on outer brim only for shingle prints only
• Slow down outer wall speed to 35 mm/s for shingle prints only
• Supports should have a top and bottom Z distance of 0.275
• Supports pattern angle is 45 degrees & top interface layer of three (3)

License
These files (3MFs, STLs, code, docs) are for personal, non-commercial use only.
No sharing, uploading, redistributing, reselling, or commercial use—including selling printed parts or assembled modules. Derivatives are included.
Violations may result in immediate loss of access and takedown/enforcement action.